
Specifications
AI Description
- Engine Type: Pratt & Whitney PT6A-42
- Engine 1:
- Time Since Overhaul: 354 hours
- TBO: 3600 hours
- Engine 2:
- Time Since Overhaul: 6698 hours
- TBO: 8000 hours
- 1st & 2nd stage PT disk due in 30 cycles
- Propellers: Raisbeck, overhauled April 27, 2021 (Left) and January 5, 2024 (Right)
- Avionics:
- Dual Collins ADF-60A
- Sperry SPZ-200A Autopilot
- Garmin GPS-500W
- Bendix King CAS-66 TCAS
- Collins TDR-90/ Garmin 345 ADS-B in/out
- Additional Equipment:
- Raisbeck Dual Aft Body Strakes
- Enhanced Leading Edges
- High Float Gear
- Butterfield Industries flow through anti-ice kit
- Interior:
- Executive configuration, new in 2005
- Seating for 10, including dual aft jump seats
- Leather headliner and sidewalls
- Exterior:
- Matterhorn white with burgundy, Ming blue, charcoal, and Las Vegas gold (2005)
- Maintenance:
- Phase inspections completed, next due June 11, 2024
- Lightning strike noted in 1993
About this Model
Overview
The King Air B200 is a long-running, pressurized twin‑engine turboprop commonly used for corporate transport, special missions, and owner-operator flying where runway flexibility and all-weather capability matter. Compared with light jets, it typically trades cruise speed for the ability to operate efficiently into a wider set of airports and to carry useful payloads with fewer infrastructure requirements.
Mission Fit
The B200 fits missions where reliability, payload flexibility, and access to shorter runways outweigh the need for jet speeds. It is well-suited to multi-stop days and to airports with limited ground support, while longer stage lengths may favor faster turbine aircraft.
Cabin
The pressurized cabin is typically arranged as a club-style interior with optional aft seating and an enclosed lavatory depending on configuration. Cabin height and width are modest versus jets, but the flat floor and large windows can make it comfortable for small groups on regional sectors. Boarding is via an airstair door, and baggage volume depends on interior layout and installed equipment.